New Material Source
New fabric rolls provide a cleaner starting material than post-consumer garments for buyers needing more controlled wiping cloths.
New Cotton Wipers & Cotton-Blend Wiping Cloths
Factory-direct roll-cut wiping cloths in 100% cotton, polycotton, and polyester options for cleaner, more consistent non-critical industrial wiping. Specify fabric composition, white or mixed color, GSM, cut size, folding method, and bulk packaging by sample before ordering.
Request Samples & QuoteNew Cotton Wipers for Consistent Industrial Wiping
EcoWipePro New Cotton Wipers are made from new fabric rolls rather than post-consumer garments. They are intended for buyers who need a cleaner material source, repeatable specifications, and custom options for non-critical industrial wiping.
Our main supply is Roll-Cut New Cotton Wipers. Buyers can select 100% cotton, polycotton, or polyester fabric; white or mixed color; GSM; cut size; folding method; and bulk or private-label packaging. New Fabric Offcut Wipers remain available only when suitable unused remnants are in stock.
Choose New Wipers by Material, Color & Requirement
Cotton is the main choice when buyers want a softer, more absorbent wiping cloth. Polycotton provides a more economical option, while polyester is available when cotton content is not required.
| Material Option | Available Colors | Best Fit | Buyer Notes |
|---|---|---|---|
| 100% Cotton | White or mixed color | Cleaner surface wiping, paint preparation support, finishing support, and tasks where cotton content matters | Soft and absorbent new-fabric option with more consistent specifications |
| Polycotton | White or mixed color | General industrial wiping, equipment wipe-down, maintenance, and cost-controlled supply programs | Cotton content can vary from approximately 30% to 70%; confirm the actual blend by sample |
| Polyester | White or mixed color | General wiping where cotton content is not required | Economical material option; confirm absorbency and surface suitability before ordering |
Primary Supply: Roll-Cut Wipers
Roll-cut new fabric is the stable supply program. It gives buyers better control over material, size, color, packing, and repeatability than offcut-based supply.
| Supply Type | Material Source | Consistency & Customization | Recommended For |
|---|---|---|---|
| Roll-Cut New Cotton Wipers | Full rolls of new cotton, polycotton, or polyester fabric | Fabric composition, GSM, color, cut size, folding, packaging, and labeling can be selected by buyer requirement | Repeat programs, distributors, OEM supply, surface-preparation support, equipment maintenance, and controlled industrial wiping |
| New Fabric Offcut WipersLimited availability | Unused textile remnants and available new-fabric offcuts | More flexible and economical, but fabric type, size, color, and availability vary by batch | Buyers who accept variable specifications for general industrial wiping or local repacking |
Product Specifications
| Product family | New Cotton Wipers and new-fabric wiping cloths |
|---|---|
| Main supply program | Roll-cut new fabric wipers |
| Secondary supply program | New fabric offcut wipers, subject to suitable material availability |
| Fabric options | 100% cotton, polycotton, and polyester; rayon is not included in this range |
| Polycotton content | Approximately 30% to 70% cotton depending on selected fabric; sample confirmation required |
| Colors | White and mixed color options; custom color selection can be discussed for roll-cut programs |
| Customization | Fabric type, composition, weave or knit, GSM, cut size, folding, packaging, labels, and private label |
| Lint level | Depends on selected fabric and cut method; not certified lint-free or cleanroom-grade |
| Typical uses | Non-critical surface wiping, equipment wipe-down, paint-preparation support, finishing support, printing maintenance, and general manufacturing |
| Sample confirmation | Recommended for composition, absorbency, color, hand feel, size, lint level, packaging, and surface suitability |
Packaging Options for New Wiper Programs
Packaging is set by material, cut size, handling method, buyer storage, destination, and resale requirements.
| Packaging Format | Suitable For |
|---|---|
| 1–5 kg compressed hand-carry bags | Workstations, smaller resale packs, and point-of-use supply |
| 10 kg compressed hand-carry bags | Workshop and distributor handling |
| 20 kg or 25 kg compressed bales | Bulk industrial supply and container-loading efficiency |
| Cartons and pallets | Warehouse picking, export handling, and organized distributor stock |
| Private-label packaging | Industrial distributors and resale programs, subject to order volume |
| Typical container loading | About 10–12 MT in a 20 ft container or 22–26 MT in a 40 ft HC, depending on fabric density, cut format, packaging method, and pallet use |
Why Choose EcoWipePro New Cotton Wipers?
Clear Material Selection
Select 100% cotton when cotton performance matters, or confirm polycotton or polyester when cost and application needs differ.
Roll-Cut Customization
Specify composition, GSM, color, cut size, folding, packaging, and labels for repeatable industrial wiping programs.
Factory-Direct Bulk Supply
Samples, compressed packing, cartons, pallets, export preparation, and private-label options support bulk buyers.
Ideal Applications
Choose fabric and approve samples based on the actual surface, fluid, lint tolerance, and consistency requirement. These wipers are for non-critical maintenance and industrial wiping.
Automotive Repair
Paint-preparation support, panel wipe-down, tools, and cleaner workshop wiping.
View Automotive Repair →
Mechanical Manufacturing
Equipment wipe-down, part-cleaning support, and controlled workshop maintenance.
View Manufacturing →
Metalworking
Bench wiping, machined-part support, and smoother non-critical surface cleaning.
View Metalworking →
Aerospace & Aviation
Non-critical ground maintenance and equipment wipe-down after sample approval.
View Aerospace & Aviation →
Oil & Gas
Cleaner equipment surface wiping and light maintenance; use recycled rags for heavier oil.
View Oil & Gas →
Marine & Shipping
Cabin and cleaner equipment surfaces; use yarn waste or knit rags for engine-room oil.
View Marine & Shipping →Application Guide
| Application | Recommended New-Wiper Use | Important Selection Note |
|---|---|---|
| Automotive Repair | Paint-preparation support, panel wipe-down, tools, and cleaner repair-area wiping | Confirm material and lint level for paint-sensitive surfaces |
| Mechanical Manufacturing | Equipment wipe-down, component handling, and workshop maintenance | Roll-cut supply is best when repeatable size and fabric are required |
| Metalworking | Bench wiping, machined-part support, and light residue removal | Choose material by cutting-fluid exposure and surface requirement |
| Aerospace & Aviation | Non-critical ground maintenance and support cleaning | Not certified cleanroom, FOD-free, AMS-compliant, or critical aerospace wiping |
| Oil & Gas | Cleaner equipment surface wiping and light maintenance cleaning | T-Shirt Knit Rags or Cotton Yarn Waste are better for heavier oil or loose absorption |
| Marine & Shipping | Cabin maintenance and cleaner equipment surfaces | For engine-room oil and bilge tasks, use T-Shirt Knit Rags or Cotton Yarn Waste |
Frequently Asked Questions – New Cotton Wipers
New Cotton Wipers are industrial wiping cloths made from new fabric rolls or available unused fabric remnants instead of post-consumer recycled garments. The main EcoWipePro supply is roll-cut new fabric, selected by material, color, GSM, cut size, and packaging requirement.
Roll-cut programs can use 100% cotton, polycotton, or polyester fabric in white or mixed color options. 100% cotton is the main choice when cotton content, softness, and absorbency matter. Polycotton and polyester options should be selected by the intended wiping task and sample confirmation.
Polycotton fabric can contain approximately 30% to 70% cotton. The exact composition varies with the selected fabric and affects price, hand feel, absorbency, and wiping performance. Confirm the actual blend by sample before bulk ordering.
Roll-Cut New Cotton Wipers are made from full fabric rolls and provide controlled material, size, color, GSM, and packing. New Fabric Offcut Wipers use available unused remnants and are more variable in material and size; suitable supply is limited by available offcuts.
No. Lint level depends on the selected fabric and cut method. These products are intended for non-critical industrial wiping and should not be described as certified lint-free, cleanroom-grade, FOD-free, AMS-compliant, or critical aerospace wiping materials.
Yes. Buyers can discuss fabric composition, cotton content, color, GSM, cut size, folding method, bulk packaging, carton packing, labels, and private-label requirements. Samples are recommended before finalizing a repeat order.
Choose new wipers when cleaner material source, controlled fabric selection, repeatable specification, and customization matter. Choose recycled T-Shirt Knit Rags, Sheeting Rags, or Terry Toweling Rags when lower cost and general daily wiping are the main priorities.
Explore New Cotton Wiper Products
Roll-Cut New Cotton Wipers
Our main program. Select fabric composition, color, GSM, cut size, folding, packaging, and private-label requirements for repeatable supply.
View Roll-Cut New Cotton Wipers →
Limited availability
New Fabric Offcut Wipers
Unused textile remnants for wiping programs that accept variable material, size, and availability. Suitable supply is subject to stock.
View New Fabric Offcut Wipers →Request New Cotton Wiper Samples & Quote
Tell us your preferred fabric, cotton content, color, GSM, cut size, packaging, destination port, and monthly usage. EcoWipePro will recommend a suitable roll-cut wiping option.
Request Samples & Quote